Set up Guide: How to Fit an FDF Angle Kit on Your Automobile

Putting in an FDF (Fulcrum Dynamics Formula) angle kit in your automobile can significantly enhance its dealing with and maneuverability, particularly in performance driving scenarios. Whether you’re a drifting enthusiast or looking to improve cornering precision, a properly put in angle kit can transform your driving experience. Right here’s a comprehensive guide to help you by the set up process.

What is an FDF Angle Kit?

An FDF angle kit is a modification that alters the suspension geometry of a vehicle, typically growing the steering angle. This modification permits for sharper turns and greater control during drifting or tight cornering. It consists of upgraded elements resembling prolonged control arms, tie rods, and generally modified steering knuckles.

Tools and Materials Wanted:

Earlier than you start, collect the required tools and supplies:

1. Jack and jack stands: To safely lift and support your vehicle.
2. Fundamental hand tools: Wrenches, sockets, screwdrivers, etc.
3. Torque wrench: For exact tightening of bolts.
4. Angle grinder: For modifications if required.
5. Safety equipment: Gloves, goggles, and protective clothing.

Step-by-Step Installation Guide:

1. Preparation:
– Park your automobile on a flat, level surface and have interaction the parking brake.
– Use a jack to lift the automotive and secure it on jack stands. Ensure it is stable and won’t move throughout installation.

2. Remove Wheels:
– Start with one side at a time.
– Loosen the lug nuts, lift the automobile, and remove the wheels utterly to access the suspension components.

3. Disassemble OEM Parts:
– Unbolt the factory control arms, tie rods, and different related suspension parts.
– Keep track of bolts and nuts as they will be reused or replaced with new ones provided within the kit.

4. Install FDF Angle Kit Parts:
– Start with the prolonged control arms. Install them using the supplied hardware, but don’t absolutely tighten yet.
– Connect the new tie rods to the steering knuckles.
– Ensure all components are aligned properly according to the kit’s instructions.

5. Adjustments and Modifications:
– Depending in your particular vehicle and kit, it’s possible you’ll must make minor adjustments or modifications. This could embody trimming of fenders or minor welding if steering knuckle modifications are required.

6. Torque and Secure:
– Once all components are in place and aligned appropriately, torque down all bolts to the manufacturer’s specifications. This ensures safety and reliability.
– Double-check all connections to make sure there isn’t a play or loose components.

7. Reinstall Wheels:
– Put the wheels back on the automobile and hand-tighten the lug nuts.
– Lower the car from the jack stands after which torque the lug nuts to the appropriate specification in a star pattern to make sure even tightening.

8. Test and Alignment:
– Before taking your automotive for a drive, turn the steering wheel from lock to lock to make sure smooth operation without any binding.
– Schedule a professional alignment to optimize the setup for your specific driving needs. Proper alignment is crucial for each performance and tire wear.

9. Final Checks:
– Examine all connections and components as soon as more after a brief test drive.
– Listen for any uncommon noises and guarantee everything feels solid and responsive.


Putting in an FDF angle kit is usually a rewarding project for any automotive enthusiast looking to improve their vehicle’s handling characteristics. By following this guide and carefully putting in every component, you can achieve sharper steering angles and higher control, whether or not on the track or during spirited driving. Remember, safety and precision are paramount all through the set up process to make sure both performance good points and reliability of your modified suspension system.

For more information regarding fdf fabrication review the webpage.